Install Kitchen Cabinets Yourself and Save Thousands

If you can install kitchen cabinets yourself in your kitchen remodeling project, you will be surprised how much you can save. By installing kitchen cabinets on your own, you can save yourself thousands, and could put that money saved towards some upgrades in your new kitchen, such as high end appliances, top of the line counter-tops, custom cabinets, or a new floor.

However, there are some important aspects of your kitchen cabinet installation that you need to be aware of. If you have no idea as to where to begin when it comes to installing kitchen cabinets, then I will be glad to give you some pointers.

To install kitchen cabinets, you are going to need some basic power and hand tools to complete the project. These include a corded and cordless drill, table saw or circular saw, belt sander or hand held planer, jig saw, hand plane, a countersink bit, hammer, stud finder, clamps, four foot level and various sized drill bits.

Once you have determined the layout of your new kitchen, and have found the high point of the floor, then you are ready for your kitchen cabinet installation. To begin, you will want to start with the corner wall cabinet. Locate the framing behind the cabinet location using a stud finder, and mark the stud locations on the wall. Next, you will want to transfer those measurements to the backside of the cabinet, or best, transfer the stud locations to the inside of the cabinet and drill each location through the back of the corner wall cabinet using a, 11/64″ drill bit. Make sure that the holes are drilled through the hanging strip located at the top and the bottom of the cabinet.

Installing kitchen cabinets plumb and level is extremely important,because as you progress with the run of the cabinets, any small imperfection in the levelness of the first cabinet installed will be accentuated with each and every proceeding cabinet. When you install kitchen cabinets in your new kitchen, take extra time to make sure that they are installed level and plumb. Trust me, you will have a much easier time with your kitchen cabinet installation if you take the time to do so.

You will need to shim the corner cabinet out to where it is perfectly level and plumb. Get the first cabinet perfect, and the rest of the cabinets will basically fall into to place, so to speak. This is not to say that you will not need to make sure that they are level and plumb as well, but you will not have the problem of trying to adjust for the previous cabinet installed incorrectly.

Another point that I should make here about installing kitchen cabinets is to make sure that you remove the doors and the interior shelves before you try to hang them on the wall. Not only will this make them easier to handle, it will keep the chances of damaging the doors to a minimum, which by the way, are the most expensive component of the cabinet.

Wholesale Kitchen Cabinets: How to Save Money By Buying Direct

If you are planning to remodel your home or move into a new home, it can be quite an expensive affair. Hence, it is important to get full value for the money you invest on your home. The kitchen forms a very important part of any home and is a place that has to provide a lot of style as well as comfort. It is very important to invest your money very wisely on purchasing the most suitable kitchen cabinets.

If you are looking to save money on your kitchen, it is better that you go in for wholesale kitchen cabinets. Since kitchens are one of the more expensive rooms of a house, it is important to look at various options that will enable you to buy good quality cabinets at wholesale prices. There are a lot of people who think that buying wholesale means buying low quality products. However, this is not true. The costs are comparatively lesser because there are no middlemen or retail outlets involved and you are able to get it without having to compromise on the quality of the cabinets.

Before you actually buy kitchen cabinetry, you should know what exactly you want. Whether you want to go for a RTA kitchen cabinet or you want ones designed exclusively for your home. You should also be able to determine what kind of cabinets you want for your kitchen, whether you want to opt for a wood cabinet or metal based, oak, etc. It is better to make a list of what you want and also be clear on the amount you are willing to spend on your kitchen cabinets. This will help you in finding a suitable cabinet for your kitchen without having to compromise on the quality or the look.

Buying kitchen cabinets can be an expensive preposition if you want to buy from a retail outlet or a departmental store. Quite often, people end up buying poor quality cabinets in order to save money. However, you can now buy wholesale kitchen cabinets online and choose from a wide variety of designs and models that will help you in finding the most suitable cabinets for your kitchen.

There are so many designs and models available online that it can be quite confusing if you are not aware of what to look for. However, it is suggested that you take sometime out and browse through the various websites dedicated to home improvement products and kitchen cabinets. You will come across a wide variety of RTA cabinets also in different designs and styles.

When you are buying kitchen cabinets online, it is important that you also go through the customer review pages of the websites you visit online as it will help in understanding the various manufacturer products. At the same time you will be able to understand the advantages and disadvantages of various cabinet types thus helping you make an informed decision. This will enable you to buy wholesale cabinets without compromising on the quality, style, appearance or price.

A Quick Guide About Kitchen Cabinets

Kitchen cabinets were initially designed as a functional item. However, today along with its functionality it has become a fashionable item which is used to decorate one’s home. The cabinet comes in different colors and models. Having a cabinet in your kitchen will change the entire look of your kitchen instantaneously.

When it comes to choosing a kitchen cabinet one must always keep in mind that the design of the cabinet will affect the final outlook of your entire kitchen. So if you are actually planning to remodel your old boring kitchen then it is advisable to choose a cabinet design that goes well with the remodeled kitchen.

You can either have a custom-made or an assembled from the factory. The investment on a new cabinet is pretty big and some people would rather choose re-facing or redesigning their existing cabinet. Irrelevant of the choice you make here are few steps that you should always consider before investing in the cabinet.

1. Take your time and become very familiar with the different types and styles of the cabinet that is currently available in the market. This way you can actually choose the best choice that is available in the market.

2. Measure the space available in your kitchen, so that you can make the right choice when you choose the cabinet. Accurate measurement can prevent all the future headaches like buying a smaller cabinet or a bigger cabinet than the available floor space.

3. As mentioned earlier cabinets are a quite sizable investment and something which you can’t keep changing randomly. So take your time and calculate the budget. Know if the cabinet is worth the money you are ready to spend and is the money spent on a cabinet is really worth it.

4. Lastly if you have any doubts do not hesitate to seek professional help. It is good to review your plans with a kitchen cabinet designer to get the professional point of view.

Various types of kitchen cabinet available in the market:

Stock – these cabinets are basically for functionality purpose. However, one can always find various designs in stock cabinets. The main plus point in stock cabinet is the price tag that is attached to the cabinets. These are very economical and are mainly produced in large quantities. Custom- these are hand crafted cabinets. Along with the functionality it is also used as a designer piece in the kitchen. These cabinets differ from one to another and can be made in shape and size that one desires.

How To Stain Kitchen Cabinets

Staining kitchen cabinets, and how you prepare to stain depends on what you are starting with.

  • Are you building your own cabinets?
  • Are your cabinets unfinished in your garage waiting to be installed?
  • Are your cabinets new and already installed, but in need of staining?
  • Are you stripping your cabinets and then re-staining and refinishing them?
  • Or are you going to try your hand at re-facing?

You will prepare and stain a bit differently for each of the above situations; however, there are some basic steps and supplies that are universal when you are staining kitchen cabinets.

List of Basic Supplies You Will Need:

  • a good stain (I like a good oil-based stain, like a Sherwin-Williams oil based wiping stain)
  • stirring stick
  • sand paper (150 to 320 grit)
  • saw horses or work bench to stain on
  • drop clothes/cardboard
  • cotton rags
  • carpet pieces or other tool to apply stain (the right carpet really works well to get into those nooks and crannies)
  • clothes/shoes you don’t mind getting dirty (the stain won’t come out – it’s a good idea to invest in a body apron that you don’t mind getting ruined)
  • dust mask/respirator face mask
  • latex or rubber gloves
  • lacquer thinner or acetone (to remove stain off of where you don’t want it – like hinges or the floor; if you don’t have these, you can use finger nail polish remover, most contain acetone)
  • well ventilated area to work in
  • area to set wood to dry

Step #1 – Remove Doors, Drawers, Hardware and Lay Flat

If you are building your own cabinets, staining them is simply a step in the building process. You can stain everything, and put finish on it too, before you ever put anything together.

If your cabinets are pre-built, try to remove as much hardware as possible (handles and hinges). It is much easier to put the hardware back on than to try and clean it later. If you can take the hardware off, number each piece, then also put that same number on the wood where the hardware sits – making sure it is inconspicuous.

You should also remove the doors and drawer fronts before you begin staining kitchen cabinets, if you can, so you can lay them flat. Again, if you remove hinges, etc., do so and number so it won’t show on your finished product.

The advantage of having an item lying flat while you are staining kitchen cabinets is that the stain and finish won’t run all over and create a look you don’t want – sloppy. Who wants to put a lot of work, time, and effort into staining kitchen cabinets, just to see the finished product look sloppy and completely unprofessional? Learning how to stain kitchen cabinets means ending up with a stain job that looks beautiful and professional and says to the world that you know what you’re doing. You want your cabinets to look like you paid a fortune, even if you didn’t.

Step #2 – Look Your Pieces Over and Sand If Necessary

When first staining kitchen cabinets, look over the pieces you want to stain. Do they need to be sanded first? Most likely they are already sanded well, and you’ll just have to sand out small scuff marks which resulted from handling them or installing the cabinets.

Use a fine grit sandpaper, 150, 220, or even higher. Once you begin staining kitchen cabinets, any marks you’ve missed in sanding will jump out at you. You can always sand out marks and scuffs after you’ve stained your kitchen cabinets, but that takes more time and energy, so try to do a good job of sanding initially.

Step #3 – Setting Up The Area Where You Will Be Staining Kitchen Cabinets – Remember Safety First!

It is a good idea to stain items on saw horses if you have them, or on any sturdy table or bench that is about waist high. As you learn how to stain kitchen cabinets, you will be glad you used a drop cloth or cardboard on your floor or on any area that you don’t want stain on. You can use lacquer thinner or acetone to wipe up stain, but it doesn’t always work (like you can almost never get stain out of clothes). Also, lacquer thinner or acetone might melt or ruin what the stain is sitting on. If you don’t have lacquer thinner or acetone, use finger nail polish remover. It has acetone in it. Don’t inhale the fumes of such products, or get them on your hands.

You’ll also need to mask off any parts of the cabinets you don’t want stained, such as the interiors.

Wear clothes and shoes you don’t mind getting dirty, and/or a full body apron.

You should also wear latex or rubber gloves and safety glasses when you are staining kitchen cabinets. These precautions are not only for when you are learning how to stain your kitchen cabinets, but are necessary even if you become an expert. Safely is of the utmost importance.

ALERT: BEWARE OF DANGEROUS FUMES. Wearing a dust mask won’t do any good against fumes. Only wear a dust mask if you are in the sanding process. You will either have to invest in a respirator face mask for your safety, or ensure that you are in an extremely well ventilated area, such as your garage with doors wide open, or both. Fumes from the chemicals used while you are staining your kitchen cabinets are extremely dangerous, not only to breathe in, but, if concentrated enough, they can cause an explosion. And, don’t be fooled by water-based products. They can give off fumes and hazardous odors as well. Each product’s danger level is different, but error on the side of caution. Knowing how to stain kitchen cabinets means knowing how to do it safely.

Step #4 – Applying The Stain

Once you know where you are going to be staining kitchen cabinets, and have yourself and your area prepared, open your stain can and stir well. This cannot be overstated enough. When the can sits for any length of time, the stain will separate and sediment (color) will sit at the bottom of the can. If you do not stir well, the stain you use from the top of the can will be much lighter than the stain you end up using at the bottom of the can (and at the end of your project). These results will not look good. The things you stain first will be much lighter than the last pieces you stain.

To apply the stain, one of the easiest tools to use are old carpet remnants. Cut them into approximately 4 x 3 inch rectangles. Dip one end of the carpet into your stain, then rub the carpet onto your wood. It doesn’t matter if you go with the grain or against the grain at this point, you just want to make sure that you cover all surfaces. If you are doing intricate work, such as doors with groves or raised panels, be sure to get stain into corners. Over staining at this point is a good idea, because the excess will be wiped off. This is where the drop clothes and wearing an apron come in handy, because it can get pretty messy!!

After you apply stain to your piece, look it over to make sure you didn’t miss any spots. Areas that are commonly missed in learning how to stain your kitchen cabinets include: grooves, door edges, drawer edges, or any corners – like where the raised panel corners meet the door frame.

Step #5 – Wiping The Stain Off – A Very Important Multi-Step In Ensuring Your Piece Looks Great

As you are first learning about staining kitchen cabinets, I suggest you wipe the stain off immediately. Most cans of stain suggest leaving the stain sit for 10 minutes, then wiping off the excess. I’ve found that this does not usually change the color, so why wait? Also, if you are staining kitchen cabinets that are already installed, or already built, and you can’t lay pieces flat, your stain will run all over if you let it sit for any length of time. You will want to wipe it up as soon as possible.

If you want a darker piece of wood, purchase a darker stain color. The only time that waiting to wipe excess stain off will actually darken your piece significantly is if you can let it sit for over 30 minutes. This is really a false darkening, and the problem with it is that your stain is usually so dry by then that it’s difficult to remove smudges and wipe off the piece properly. The stain ends up sitting on top of the wood, not soaking in. Use your own judgment. If you decide to wait the 10 minutes, do it on every piece to ensure consistency.

Actually wiping the excess stain off in itself is a two step process.

First, have several cotton rags at your disposal. Put a rag in each hand. Never touch your wood with bare or gloved hands alone after it’s been stained, as it will leave a smudge mark. Wipe off the bulk of the excess stain. At this point it doesn’t matter if you are going with the grain or not, you just want to get the big spots of stain wiped up.

The second step is a finishing type step in staining kitchen cabinets. Take another clean rag. Go back over your piece of wood, this time with the grain. The second rag takes more stain off, preventing smudge marks. The biggest enemy in staining is leaving smudge marks.

Following these two steps and not being afraid to use rags as needed will ensure that you don’t leave any smudges. Look your piece over. If you have left any smudges, wipe off gently and blend color in with your cotton rag.

Step #6 – The Final Step In Staining – Set Your Pieces Aside To Dry

Now that you’ve learned how to stain kitchen cabinets, set your pieces aside to dry (or just let them hang there if they are already installed). You can lay your piece on a flat surface if only one side is stained. If your piece has multiple sides that are stained, you can lay it flat on something that allows for air circulation to the back, such as saw horses, or if you do enough staining, purchase a professional staining rack. One caveat: where the saw horses or rack touch the stained piece, smudge marks may be left. Before you finish a piece that has dried on such equipment, you may need to touch up that side.

You can also lean your piece against a wall to dry. When your stain is drying, it is best to let air get to as many sides that you have stained as possible. It’s also okay to let fans run in the area where you are drying your piece. This helps it to dry faster and doesn’t hurt the end result; however, never let fans run on a a piece that you’ve put finish on.

How long your piece has to dry depends on what type of stain you are using. Read the label and act accordingly.

ONE FINAL AND IMPORTANT NOTE ABOUT SAFETY AS YOU LEARN HOW TO STAIN KITCHEN CABINETS

Remember to hang your rags to dry, ensuring air movement around them as well. Too many times, bunched together wet staining rags have caused a tragic explosion resulting in fire and even death. Please be careful!!

You Are Now Ready For The Next Step – Finishing

Congratulations!!! You have learned how to stain kitchen cabinets and have completed your staining project!

After your pieces are completely dry, you are ready for the next step – putting a beautiful, clear finish on your beautifully stained kitchen cabinets!

And remember – HAVE A HAPPY KITCHEN!!!

How Can You Make The Regular Cabinets Look Like The Custom Kitchen Cabinet?

Do you have a collection of kitchen cabinets that look unattractive and ugly? If yes, why not go for a makeover? Custom kitchen cabinets look absolutely wonderful and are seen to adorn the kitchen spaces of many homeowners. But most people refrain from investing in customized cabinets fearing that it will cost them a fortune. But this is not the case every time. If you already have a set of cabinets in your kitchen you can upgrade their look and make them look like customized cabinets. Cabinets are not just meant for storing stuff, they are also required for enhancing the beauty of the place where they are installed. Custom cabinets enhance the look of the kitchen and also carry out the task of storage efficiently.

Upgrading a sturdy but an ugly collection of kitchen cabinets is a budget friendly idea that can yield great benefits. If you are careful about the cabinet manufacturing process and plan the layout of the cabinets before hand, you can avoid complications. The first and foremost step here is to replace the hardware. Just by replacing the old and worn out hardware you can impart a new and fresh look to the kitchen itself. Replacing the hardware is no expensive affair but the result that you would obtain is much more than the money that you would spend on it.

Even if the cabinets are manufactured of laminate, go for some fresh paint. Paint them with top quality paint with the shade that suits your kitchen. Your cabinet might be of traditional or modern style; whatever the style of your kitchen cabinet, you would surely find paints that would go with their style. A good primer and latex paint will make your old, ugly cabinets look like up to date custom kitchen cabinets. You might have flat looking kitchen cabinets but you can do something about that too; choose some moulding. Adding decorative moulding to the kitchen cabinets will help them to look all the more attractive. But the mouldings should be in accordance to the color scheme and style of the cabinets for maximum results.

Custom kitchen cabinets are all about having cabinets that meet your requirements and needs. If you have a cabinet collection that is not spacious or organized enough, then you can add new shelves and doors to it during its upgrading. Get new doors and front drawers. Add new frames and glass doors in order to make the cabinet suitable for your use. Moreover, these accessories will make the cabinets look all the more attractive. Shop around to find the best possible items for your cabinet that come within your budget and communicate the details to the manufacturer. Manufacturing custom kitchen cabinets and enjoying from their benefit is a cost effective affair; all you need is some planning and hard work!

Your Kitchen Cabinets

Many humans anticipate about alteration their kitchen cabinets, this is not an simple home advance task, it is aswell pricy sometimes and may yield some time to complete. If this catechism is befitting you from starting your kitchen chiffonier accomplish over, then, now is the time for you to accomplish a decision.

The afterward are the factors to accede if allotment amid re-facing and replacing your kitchen cabinet.

When to reface kitchen cabinets?

• If you wish a fresher attending to your kitchen cabinets.

• If you do not wish to abolish the aboriginal architecture abstracts that amount too abundant in the bazaar today.

• If you wish to save bags of dollars but still authoritative your kitchen attending as adorable as you wish it to be.

• If replacing would not add amount to your home.

• If you are planning to advertise your home and the kitchen chiffonier is affairs down the amount of your home.

What are the drawbacks of re adverse kitchen cabinets?

• If you accept approaching affairs to advance your kitchen plan space, again refacing kitchen cabinets now could be added expensive.

• You cannot do changes in your kitchen cabinets to install added allowance for specialty items.

• The autogenous chiffonier charcoal the same, so does the maintenance.

• You still accept to accord with aforementioned old workspace as able-bodied as accumulator problems.

What are the advantages of refacing kitchen cabinets?

• It is about cheaper.

• It is added ambrosial to abeyant home buyers.

• It redefines the attending of your kitchen.

• It is fresh, clean, and up to date.

When to alter kitchen cabinets?

• If you wish to advance kitchen traffic.

• If you wish to add accumulator rooms.

• If you wish to extend countertop plan space.

• If the cabinets and drawers are not alive anymore.

• If you charge to install new appliance.

• If the copse (if it is complete with wood) is falling apart.

• If termites accept already fabricated your kitchen cabinets their abiding residence.

• If added pests accept fabricated its move in your kitchen cabinets.

• If you are planning to reside indefinitely to your present home.

• If you accept the money to armamentarium the kitchen chiffonier replacement.

What are the drawbacks of replacing kitchen cabinets?

• You ability be throwing abroad big-ticket wood.

• The amount is 20 to 40 percent college than just refacing your kitchen chiffonier depending on the changes you charge to make.

What are the advantages of replacing kitchen cabinets?

• Avant-garde kitchen cabinet abstracts are failing and simple to maintain.

• Avant-garde kitchen cabinet abstracts are stronger and added durable.

• There are abounding up to date designs to accept from several kitchen chiffonier brands.

• New kitchen chiffonier could endure for several years.

• The kitchen blueprint would advance according to your avant-garde needs.

• You can add specialty cabinets and added shelves.

Four Tips in Choosing White Kitchen Cabinets To Get the Most For Your Money

White kitchen cabinets are to kitchen architecture what a little atramentous dress is to fashion. They go everywhere. The way you accessorize and accept data accomplish them a absolute fit in any kitchen actualization or design. Many humans accept white cabinetry for the kitchen because it makes the kitchen ablaze and ablaze and because white looks clean.

In agreement of price, white kitchen cabinets are added big-ticket than some added chiffonier styles, but the amount in fact is bent added by the copse acclimated to accomplish the cabinets than the white acrylic or vinyl coating. For example, at one home advance abundance a 36″ bore abject chiffonier will amount $116 in oak, $125 in white, and $154 in maple. There are, however, abundant variations in the amount and the superior of white cabinets.

The acrylic or blanket on white kitchen cabinets can adumbrate the copse acclimated to physique the cabinets. For example, the chiffonier ability be congenital of atom board, pine, oak, hickory, maple, or a lot of any added affectionate of wood. It could even be congenital of plywood. This is an important agency in free the superior of ability in the cabinets.

Choosing white cabinets can be a way to save money by opting for a lower superior actual with a acceptable exoteric finish. You accept to accumulate in mind, however, that kitchens accomplish a lot of calefaction and steam. Be abiding you accept a actual that will not bastardize or peel.

They are aswell accessible in a advanced ambit of styles, authoritative them adapted in a kitchen of any style. But it is important to bout the actualization of the chiffonier doors and the architecture actualization with the actualization of your kitchen. Here are some tips to advice you choose.

White cabinets (or ivory) are actual accepted in acceptable actualization kitchens, abnormally French and Southern styles. Cabinets in a acceptable kitchen about accept a raised-panel aperture design. Southern actualization acceptable kitchens frequently cover glass-panel doors as well. Accumulate in apperception that acceptable kitchens tend to be affected and somewhat formal.
White kitchen cabinets are aswell accepted in country-style kitchens, although accustomed copse finishes are generally preferred. White is a lot of accepted in an English country-style or a Victorian bungalow, but it is aswell actual frequently apparent in the American farmhouse. Country kitchens by architecture arise beat and able-bodied lived-in, so white cabinets can be advisedly alloyed with added finishes as well.
White can aswell be advisedly acclimated in an all-embracing actualization kitchen area actually annihilation goes and woods, finishes and stylistic actualization are frequently actual mixed.
Contemporary actualization kitchens, whether affected or retro, aswell frequently use “classic” white. In a abreast kitchen, however, chiffonier doors will accept flat, bland surfaces to aftermath a glassy appearance. Glass, decidedly arctic or textured glass, aperture panels are aswell frequently used.

White kitchen cabinets can be absolute in any kitchen. In a actual baby kitchen, white cabinets can actualize a activity of greater admeasurement and light. But with absorption to aperture and architecture data and affliction in selecting the appropriate hardware, white cabinets can be an ideal best for any kitchen advance or remodel.